Please carefully read complete instructions before beginning installation.
Note: These instructions are for installation with solid surface, composite material countertops. Kitchen Expo recommends professional countertop installers and is not responsible for damages to the countertop or sink during installation.

1. Supplied cutout template provides three options of installation:
A. Flush mount: Sink edge is flush with countertop opening. (Figure 1)
B. Reveal mount: Sink rim is exposed approximately 1/4” from the edge of countertop opening. (Figure 2)
C. Recess mount: Sink rim is recessed approximately 1/8” from the edge of countertop opening. Cut countertop approximately 1/8” inside of flush mount cut line. (Figure 3)

2. Cut out the appropriate template for your sink model and desired installation option. Place template in desired position on countertop, locating center of the bowl over cabinet and faucet holes.
3. Trace the outline of the template and cut countertop along the inside of the line using appropriate cutting tools. Template is for guide only. Use physical sink to ensure accurate cutout opening.

4. It is recommended to install a faucet at this point before installing the sink.

Why are stainless steel sinks so popular?
Stainless steel holds the highest ranking in material choice for kitchen sinks for a good reason: with minimal care, the sink can look like new for a very long time. Kitchen Expo sinks have a superior grain and polish compared to most brands on the market.
Aren't all makes and models made alike?
Kitchen Expo uses premium Type 304 Stainless Steel on all models. Chrome increases the hardness and wear-resistance of your sink, and Nickel increases the strength and resilience to dents. We only use premium 18/8-10 mix (18% Chrome and 8-10% Nickel); some inferior brands use "Type 300", which has a higher chance of rusting eventually.
What does the term "Gauge" mean and why should I care?
Gauge is an inverse measurement range, where the lower the number, the thicker the steel. KE sinks range all the way up to 18 and 16 gauge for most of our offering. Most premium brands on the market today range from 20 to 18 gauge. Finishing & polishing techniques and using the premium mix of 18/10 steel are more important than gauge, but we also offer all popular gauges.
Is undercoating important?
Proper and well appointed undercoating will aid in noise reduction, condensation prevention, and maintaining the water temperature when pre-soaking dishes. Kitchen Expo sinks rate in the highest for these benefits.
Do all sinks have sound absorption?
KE sinks have sound absorption rubber pads on all models, and fortified with Spray coat Undercoating on top of the rubber pads on most models. KE sinks are among the quietest sinks available today, fully insulated from the noise of clanging dishes, pots, and pans.
Are KE sinks warranteed?
Every KE sink are warranted against manufacturing defects in material and workmanship.